LBSA 10.6kWh 51.2V 208Ah LiFePO4 Wall Mount Solar UPS Battery

Advanced Lithium Iron Phosphate (LiFePO4) Technology

The LBSA 10.6kWh Wall Mount Solar UPS Battery is built with a high-performance 3.2V 104Ah aluminum case prismatic cell, delivering superior safety and extended cycle life.

Comprehensive Battery Management System (BMS)

This battery is equipped with advanced BMS and protects against over-discharge, over-charge, over-current, and extreme temperatures, ensuring safe and efficient operation.

Precise Monitoring and Balancing

The BMS continuously monitors charge and discharge states, maintaining balanced voltage and current across each cell for optimized performance.

Exceptional Discharge Performance

With a wide operating temperature range of -20℃ to 50℃, this battery offers reliable discharge performance and long-lasting cycle life, even in demanding conditions.

Flexible Expansion

Capable of connecting up to 16 packs in parallel using 8 DIP switches, this battery can easily scale to meet growing energy requirements.

250A DC Circuit Breaker

Added safety is ensured with a 250A DC circuit breaker, protecting your system from potential issues.

Specifications

• Nominal Voltage: 51.2V
• Nominal Capacity: 208Ah
• Nominal Power: 10.6kWh
• Dimensions: 750mm x 135mm x 520mm
• Weight: 84kg
• Discharge Cut-off Voltage: 44V
• Charge Voltage (Bulk + Absorption): 56.2V
• Max Discharge Current: 200A
• Recommended Charge Current: 100A
• Communication Interface: CAN
• Configuration: 16S: 2P
• Operating Temperature:
  • Charge: 0～50℃
  • Discharge: -20～50℃
  • Storage: -20～55℃
• Cell Chemistry: Lithium Iron Phosphate (LiFePO4)
• Cycle Life: ≥80% capacity state after 4800 cycles (0.5C, 25℃, 100% DOD)
• IP Level: IP20
• CAN Bus Communication: Compatible with Victron, Growatt, Sunsynk, DEYE, Luxpower, and more.

Warranties

All inverters and batteries must be installed by a qualified electrical wireman or master electrician with valid registration through the Department of Labour. A Certificate of Compliance (COC) specific to the backup or solar system installation must be issued. Installations must comply with SANS 10142 and all its parts. Warranty claims submitted without installation photos, a valid COC, and proof of installation by a qualified wireman/master electrician may be rejected, rendering the warranty null and void.