![SA Solar 30 Tube Solar Collector](https://solarguru.co.za/wp-content/uploads/2020/02/SA-Solar-30-tube-solar-collector.jpg)
SA Solar 30 tube solar collector
February 15, 2020![200 Liter Direct Tube Solar Geyser High Pressure System](https://solarguru.co.za/wp-content/uploads/2020/04/200-Liter-Direct-Tube-Solar-Geyser-High-Pressure-System.jpg)
200 Liter Thermosiphon Tube Solar Geyser High Pressure System
April 15, 2020150 Liter Thermosiphon Tube Solar Geyser High Pressure System
R22,800.00
SKU: DirectSolarGeyserHighPressure150L Categories: Premium Solar Geysers, SA Solar Geysers, Solar Geysers
150 Liter Thermosiphon Tube Solar Geyser High-Pressure System overview
150 Liter Thermosiphon Tube Solar Geyser High-Pressure System can be used in frost and frost-free locations and where the water quality
is good (less than 600ppm Total Dissolved Solids/Minerals).
150 Liter Thermosiphon Tube Solar Geyser High-Pressure System, is where the water to be used in the household (hot water) circulates through the solar vacuum tubes manifold, transferring solar energy into the storage tank of the solar water heater.
Brand | SA Solar |
---|
Brand
SA Solar
Features
- The SA Solar Water Heater Direct System complies with SANS 1307, is SABS 400kPa approved and can be used as a close coupled system or split system.
- The inner cylinder is manufactured from 2mm steel and thermo fused porcelain enameled for cylinder longevity and hygiene.
- Polyurethane insulation between the inner cylinder and outer casement reduces energy and heat loss.
- 2x aluminum sacrificial anodes are fitted for corrosion protection.
- The solar water heater has an isolator switch fitted on the front end dome (IPX4 rated) and designed for domestic hot water application in conjunction with an array of solar vacuum tubes.
- The two extra water connections required for connecting the manifold above the solar vacuum tubes, and the booster element, ensures that the solar water heater can be used as a conventional electric water heater and as a solar water heater.
- The solar water heater thermostat will automatically switch on when the incoming hot water from the manifold above the solar vacuum tubes, has not reached the set temperature setting on the thermostat. This will occur on cloudy days and at night when the water temperature drops in the solar water heater or when hot water is drawn off and cold water enters the solar water heater.
Specifications
Capacity (Litres) | Element Rating (kW) | Operating Pressure (kPa) | Mass Empty (kg) | Water Connections (BSP Male) | Solar Connections (BSP Male) | |
150 | 2 | Up to 400 | 36 | 3/4″ | 3/4″ |
Dimension A (mm) | Dimension B (mm) |
1070 | 538 |